What is left to make ?
22nd November 2010
I have reached the stage in the construction
of parts that I now need a list to show me what I have still to make.
Part |
Date done |
Part |
Date done |
| Head gasket 20 |
9/11/10 |
Ignition stud 27 |
16/11/10 |
| Timing block 28 |
16/11/10 |
Timing strip 29 |
16/11/10 |
| Push bar support 31 |
10/11/10 |
Push bar spacer 33 |
10/11/10 |
| Lower pivot 43 |
17/11/10 |
Striker arm ( from casting ) 44 |
17/11/10 |
| Contact adjuster 45 |
17/11/10 |
Striker strip 46 |
18/11/10 |
| Pivot pin 47 |
17/11/10 |
Speed lever 48 |
17/11/10 |
| Lever stud 49 |
17/11/10 |
Lever washer 50 |
left out |
| Speed screw 51 |
17/11/10 |
Push bar 53 |
10/11/10 |
| Striker plate 54 |
18/11/10 |
Roller pin 56 |
16/11/10 |
| Adjuster 57 |
16/11/10 |
Exhaust mount 72 |
18/11/10 |
| Exhaust cap 74 |
19/11/10 |
Dome nuts 69 |
left out |
| Exhaust spacer 73 |
19/11/1- |
Oil tube 79 |
12/11/10 |
| Oil cup base 80 |
9/11/10 |
Oil cup lid 81 |
9/11/10 |
| Carb Body206 |
14/11/10 |
Throttle 207 |
15/11/10 |
| Air cleaner 208 |
15/11/10 |
Choke 209 |
15/11/10 |
| Jet tube 210 |
8/11/10 |
Jet screw 211 |
8/11/10 |
| Fuel tank 212 |
to be made |
Main oiler to cylinder (own design)
|
19/11/10 |
| Gudgeon pin cap 22 |
12/11/10 |
|
|
|
